Hydrosys
ไทย English
Request a Quote

All of Our Products & Services

General Wastewater Treatment Wastewater Treatment System General Wastewater Treatment Sludge Dewatering & Drying Sludge Treatment System Sludge Dewatering & Drying Evaporation & Zero Liquid Discharge Evaporation & ZLD System Evaporation & Zero Liquid Discharge Preliminary & Primary Treatment Preliminary & Primary Wastewater Treatment Preliminary & Primary Treatment Advanced Wastewater Treatment Membrane Filtration System Advanced Wastewater Treatment Water Reuse & Recycling Water Reuse & Recycling System Water Reuse & Recycling
Polymer Preparation Unit
EQUIPMENT

Polymer Preparation Unit

Product Details

The HydroPolymer HDF Polymer Preparation Unit is for automatic preparation of polyelectrolyte solution at a concentration of 0.05–0.2%, supporting preparation rates of 500–10,000 L/hr, with a 3-chamber tank for dissolving, maturing and storing/dosing the solution. It is suitable for use together with sludge dewatering systems and DAF to consistently improve sludge flocculation efficiency.

Request a Quote
Call Us PDF Brochure
Key Features: Polymer Preparation Unit
  • 3-chamber tank separating dissolving - maturing - storage/dosing
  • Feeds polymer powder with a speed-adjustable micro screw
  • Automatic concentration control of 0.05–0.2%
  • Preparation rate of 500–10,000 L/hr
  • Alarm system for dosing screw failure / lack of dilution water / low powder level / abnormal agitator
  • Stainless steel 304 or PP tank
Benefits: Polymer Preparation Unit
  • Prepares polymer solution of consistent quality
  • Improves the flocculation efficiency of dewatering machines and DAF units
  • Prevents polymer overdosing, reducing chemical costs
  • Reduces labor and errors from manual mixing
Working Principle: Polymer Preparation Unit
  • 1. In the first compartment, polymer powder is fed by micro screw and rapidly mixed with dilution water at the preset ratio.
  • 2. The second compartment slow-mixes and ages the polymer for full hydration.
  • 3. The third compartment stores the solution and doses it to the point of use, with automatic measurement and control of water and powder feed.
Supported Industries
  • Every industry with sludge dewatering systems (Filter Press, Belt Press, Decanter, Screw Press) and DAF systems that use polymer to condition sludge or wastewater
Product Highlights
  • Complete automatic polymer preparation in 3 stages (dissolving - maturing - dosing)
  • Precise concentration control
  • Complete set of fault alarm systems
  • Tank material selectable as SUS304 or PP according to the chemical

Related Products

View All Products
Static Screen
PRE TREATMENT

Static Screen

The Static Screen / Wedge Wire Screen is used for preliminary wastewater treatment, using gravity to separate solids from wastewater without electricity and with no moving parts. It is made of SUS304 stainless steel wedge wire screen, with selectable slot openings of 0.25–3.0 mm, supporting a maximum flow rate of approximately 270 m³/hr. It helps reduce TSS and protects pumps and valves in the treatment system.

View Details
Rotary Screen
PRE TREATMENT

Rotary Screen

The Rotary Screen (External Fed Rotary Drum Screen) is a rotating drum screen for continuous and automatic separation of fine solids from wastewater. It uses a stainless steel wedge wire screen with openings of 0.25–3.0 mm, supports wastewater with high oil or grease content, and comes with a scraper blade and water spray system to help reduce clogging.

View Details
Internal Drum Screen
PRE TREATMENT

Internal Drum Screen

The Internal Fed Rotary Drum Screen is a high-efficiency drum filter in which wastewater is fed from inside the drum and separated to the outside, providing gentle flow that reduces the break-up of flocs and fragile solids. The screening basket is inside and the structure is entirely stainless steel, designed with a tightly sealed cover so odour can be controlled. It is suitable for wastewater containing soft or fibrous solids.

View Details